The Transport of Diluted Species in Porous Media Interface
This interface (), found under the Chemical Species Transport branch (), is used to calculate the species concentration and transport in free and porous media. The interface is the same as the Transport of Diluted Species interface but it uses other defaults: The Mass Transport in Porous Media property is selected, and a Porous Media Transport Properties node is added by default. The interface includes reaction rate expressions and solute sources for modeling of species transport and reaction in porous media.
This interface is dedicated to modeling transport in porous media, including immobile and mobile phases, where the chemical species may be subjected to diffusion, convection, migration, dispersion, adsorption, and volatilization in porous media. It supports cases where either the solid phase substrate is exclusively immobile, or when a gas-filling medium is also assumed to be immobile.
It applies to one or more diluted species or solutes that move primarily within a fluid that fills (saturated) or partially fills (unsaturated) the voids in a solid porous medium. The pore space not filled with fluid contains an immobile gas phase. Models including a combination of porous media types can be studied.
The main feature nodes are the Porous Media Transport Properties and Partially Saturated Porous Media nodes, which add the equations for the species concentrations and provide an interface for defining the properties of the porous media, as well as additional properties governing adsorption, volatilization, dispersion and diffusion, migration, and the velocity field to model convection.
The physics interface can be used for stationary and time-dependent analysis.
When this physics interface is added, these default nodes are also added to the Model BuilderPorous Media Transport Properties, No Flux (the default boundary condition), and Initial Values. Then, from the Physics toolbar, add other nodes that implement, for example, boundary conditions, reaction rate expressions, and species sources. You can also right-click Transport of Diluted Species in Porous Media to select physics features from the context menu.
Settings
The rest of the settings are the same as The Transport of Diluted Species Interface.
Further Reading
Variably Saturated Flow and Transport — Sorbing Solute: Application Library path Subsurface_Flow_Module/Solute_Transport/sorbing_solute