Settings for Physics Interfaces and Coupling Features

When physics interfaces are added using the predefined couplings, specific settings are included with the physics interfaces and the coupling features.

However, if physics interfaces are added one at a time, followed by the coupling features, these modified settings may not be automatically included.

For example, if single Heat Transfer in Fluidsand Laminar Flowinterfaces are added, COMSOL Multiphysics adds an empty node. When you right-click this node, you can add the coupling feature, but the modified settings are not included. To get all the modified settings presented below automatically, you may instead right-click the component node, select , and add the coupling feature from the window.

Table 5-1: Modified Settings for the Nonisothermal Flow interfaces
Physics or Coupling Interface	Modified Settings (if Any)
Heat Transfer in Solids	Discretization order from temperature Lagrange shape function is 1. A Heat Transfer in Fluids feature is added with a default editable selection set to All domains. The Absolute pressure, pA (Model Input section) and the Velocity field, u (Heat Convection section) are automatically set to the variables from the Nonisothermal Flow multiphysics coupling feature.
Heat Transfer in Fluids	The Absolute pressure, pA (Model Input section) and the Velocity field, u (Heat Convection section) are automatically set to the variables from the Nonisothermal Flow multiphysics coupling feature.
Nonisothermal Flow	The Fluid flow and Heat transfer interfaces are preselected The Compressibility option of the fluid flow interface is set to Weakly Compressible for the laminar and turbulent (RANS) flow interfaces and to Incompressible for the LES interfaces.