Sometimes, boundary conditions on two adjacent objects can come into conflict on a shared object (point or edge). For the all the boundary conditions in the thermoviscous physics that are based on constraints, you have the possibility to select that certain objects of lower dimensions should be excluded from the main selection. To do this, you must first click the Show More Options button () and select Advanced Physics Options in the Show More Options dialog box. In the settings a new sections named Excluded Edges and/or Excluded Points will then appear (when applicable). In these sections, you can select geometrical objects which should be excluded from the main selection when the constraint is applied.

A Kutta condition can be set up to handle edge singularities that appear, for example, at the trailing edge of an airfoil or at the transition from a liner (modeled with an Ingard-Myers type impedance) to a hard wall. By using Exclude Edges and Exclude Points the appropriate Kutta condition can be set up. The problematic edges or points are excluded from the adjacent conditions and extra conditions can be set up here using the user defined Pointwise Constraint.