Settings for Physics Interfaces and Coupling Features

When physics interfaces are added using the predefined couplings, specific settings are included with the physics interfaces and the coupling features.

However, if physics interfaces are added one at a time, followed by the coupling features, these modified settings are not automatically included.

For example, if single Heat Transfer in Fluidsand Laminar Flowinterfaces are added, COMSOL Multiphysics adds an empty node. When you right-click this node, you can choose from the available coupling features — , , and — but the modified settings are not included.

Table 8-1: Modified Settings for the Nonisothermal Flow interfaces
Physics or Coupling Interface	Modified Settings (if Any)
Heat Transfer in Solids	Discretization order from temperature Lagrange shape function is 1. A Fluid feature is added with a empty default editable selection. In the Model Input section of this feature, the Absolute pressure, pA, and the Velocity field, u, are automatically set to the variables from the Nonisothermal Flow multiphysics coupling feature.
Heat Transfer in Fluids	In the Model Input section of the Fluid default feature, the Absolute pressure, pA, and the Velocity field, u, are automatically set to the variables from the Nonisothermal Flow multiphysics coupling feature.
Laminar Flow / Turbulent Flow	In the Fluid Properties default feature, the Density, ρ is automatically set to the variable from the Nonisothermal Flow multiphysics coupling feature. In addition, the Use pseudo time stepping for stationary equation form check box is automatically selected under the Advanced Settings section.
Nonisothermal Flow	The Fluid flow and Heat transfer interfaces are preselected


	Note that these settings may be overridden if another predefined coupling is added.