|
2
|
|
1
|
Create a Cut Line 2D data set.
|
|
-
|
Enter the 2D coordinates for the plot. Set the starting point and endpoint of the line under x and y, for Point 1 and Point 2.
|
|
-
|
Select the Additional parallel lines check box to visualize on a set of parallel lines. Enter the Distances from the line as space-separated values.
|
|
2
|
|
3
|
Add a Line Graph and keep From parent to use the same data set as the plot group to which it belongs. Settings under y-Axis Data and x-Axis Data determine the quantity on those axes.
|
|
4
|
Continue to define the Line Graph as needed.
|
|
5
|
|
1
|
In the Model Builder, click a 2D Plot Group node to display the buttons available in the Plot toolbar.
|
|
2
|
On the Plot Group contextual toolbar, click the First Point for Cut Line button (
 ). Click a starting point on the geometry. COMSOL Multiphysics chooses default coordinates as a vertical line intersecting the data in the middle. |
|
3
|
|
4
|
 |
|
). In the 
), right-click the node, and select 
). Click an endpoint on the geometry.