Saving and Opening Recovery Files
The COMSOL Multiphysics software can store recovery files each time you start a solver. This setting is initially active by default. If the server has lost contact with the client, a recovery file is also saved or kept.
If any recovery files exist, the Recovery Files window is open when you start the COMSOL Desktop. You can also open the Recovery Files window from the Windows menu.
The update of the recovery file occurs at the following events:
•
After completing the solution for each time step specified as the output times in the Times field for a time-dependent simulation.
•
After completing each parameter step in a parametric simulation.
•
After completing each successful Newton iteration for a nonlinear stationary simulation.
The recovery files are COMSOL MPH-files that represent the state at the time that they were saved. They make it possible to recover from a solver error, which can be especially useful for long time-dependent or parametric runs.
You can control the use of recovery files using the buttons at the top of the Recovery Files window:
•
Click the Open button () to open a selected recovery file. Opening the recovery files this way ensures that the recovery file can be deleted without compromising the open model. It does not remove the recovery file when the open model is saved though
•
Click the Save and Open () button saves the recovery file to a Model MPH-file and open it. It also removes the recovery file.
•
Click the Save As button () to save the recovery file to a Model MPH-file and remove the recovery file.
•
Click the Delete button () or press Delete to remove the selected recovery files.
The COMSOL Multiphysics software keeps track of the computed time steps or parameter steps in the recovery file, so right-click the Study node and select Continue () to continue the computation from the point where it was stored in the recovery file. If you are solving a stationary nonparametric problem, the last converged Newton iteration is stored in the recovery file; selecting Continue causes the software to resume solving from this stored state.
You can make changes to these default settings in The Preferences Dialog Box in the Files section.
•
The Save recovery file check box is selected by default to save recovery files to disk during the solution process for time-dependent, parametric, and nonlinear solvers.
•
In the Folder for recovery files field, you can specify a different folder from the default to, for example, use a folder on the server where there is more disk space for storing large recovery files. Click Browse to browse to a recovery file folder.
•
In the Folder for temporary files field you can specify a different folder than the default to, for example, use a folder where there is more disk space for storing large temporary files. Click Browse to browse to a folder for temporary files.
•
If you run the COMSOL Multiphysics software in a client-server configuration, you can specify a Folder for temporary files on client and a Folder for temporary files on server.
Studies and Solvers