InterferencePattern
Plot the interference pattern resulting from the intersection of rays with a cut plane.
Syntax
model.result(<pgtag>).create(<ftag>,"InterferencePattern");
model.result(<pgtag>).feature(<ftag>).selection(...);
model.result(<pgtag>).feature(<ftag>).set(property, <value>);
model.result(<pgtag>).feature(<ftag>).run();
Description
model.result(<pgtag>).create(<ftag>,"InterferencePattern") creates an interference pattern plot feature named <ftag> belonging to the plot group <pgtag>. The interference pattern plot is used to visualize the interference of multiple rays as they intersect a cut plane. Interference pattern plots can be added to 2D plot groups.
The following properties are available:
Table 7-43: Valid Property/Value Pairs for Interference Pattern Plots
Property
Value
Default
Description
color
custom | black | blue | cyan | gray | green | magenta | red | white | yellow
red
The uniform color to use. Active when coloring is uniform.
coloring
colortable | uniform
colortable
How to color this surface
colorlegend
on | off
on
Whether to show color legend, when coloring is set to colortable.
colortable
color table name
Rainbow
The color table to use when coloring is set to colortable. See Color Tables for a list of color tables.
colortablerev
on | off
off
Whether to reverse to color table when coloring is set to colortable.
colortablesym
on | off
off
Whether to symmetrize the color range around 0 when coloring is set to colortable.
customcolor
RGB-triplet
{1,0,0} or last used color.
The uniform color to use. Active when color is set to custom.
data
none | parent | data set name
parent
The data set this feature refers to.
inheritcolor
Boolean
true
If inheritplot is not none: Determines if the color is inherited.
inheritplot
none | plot name
none
The plot that color and color range are inherited from.
inheritrange
Boolean
true
If inheritplot is not none: Determines if the color and data ranges are inherited.
interp
double array
Time corresponding to last selected solnum for transient levels.
The time to use, for transient levels. Available when data is not parent and the underlying data is transient.
looplevel
array of nonnegative integers and strings
Last solution for transient or parametric solution for each level. Otherwise first solution for each level.
The index of the solution to use, per level, or interp, but only for transient solutions. Available when data is not parent and the underlying data has multiple solutions.
originspec
manual | index | intensity
manual
Determines how the origin of the interference plot is defined.
originx
double
0
If originspec is manual, determines the x-coordinate of the origin.
originy
double
0
If originspec is manual, determines the y-coordinate of the origin.
originz
double
0
If originspec is manual, determines the z-coordinate of the origin.
outersolnum
nonnegative integer
1
The index of the outer solutions to use. Applicable only for parametric sweep models.
rangecoloractive
on | off
off
Whether to use the manual color range specified in rangecolormin and rangecolormax. The color range specifies the minimum and maxim value in the plotted colors. Default is the minimum and maximum data values.
rangecolormax
double
Plot-dependent
The maximum color range value. Active when rangecoloractive is on.
rangecolormin
double
Plot-dependent
The minimum color range value. Active when rangecoloractive is on.
rangedatactive
on | off
off
Whether to use the manual data range specified in rangedatamin and rangedatamax. Values outside the data range is not plotted.
rangedatamax
double
Plot-dependent
The maximum data value. Active when rangedataactive is on.
rangedatamin
double
Plot-dependent
The minimum data value. Active when rangedataactive is on.
rangexactive
on | off
off
Whether to use a manual range of x-coordinates for the grid points.
rangexmax
double
Plot-dependent
The maximum x-coordinate in the local coordinate system of the interference pattern plot. Active when rangexactive is on.
rangexmin
double
Plot-dependent
The minimum x-coordinate in the local coordinate system of the interference pattern plot. Active when rangexactive is on.
rangeyactive
on | off
off
Whether to use a manual range of y-coordinates for the grid points.
rangeymax
double
Plot-dependent
The maximum y-coordinate in the local coordinate system of the interference pattern plot. Active when rangeyactive is on.
rangeymin
double
Plot-dependent
The minimum y-coordinate in the local coordinate system of the interference pattern plot. Active when rangeyactive is on.
rayindex
int
1
The index of the ray used to define the location of the origin of the interference pattern plot. The origin is located at the intersection of the specified ray with the cut plane. Active when originspec is index.
solnum
nonnegative integer
Last solution for transient or parametric solution. Otherwise first solution.
The index of the solution to use. Available when data is not parent and the underlying data has multiple solutions.
solrepresentation
solnum | solutioninfo
solutioninfo
Indicates which method of selecting solutions is active.
t
double
Time corresponding to last selected solnum.
The time to use, for transient problems. Available when data is not parent and the underlying data is transient.
timeinterp
on | off
off
on if t is used to determine time steps, off if solnum is used.
title
String
The auto-title.
The title to use when titletype is manual.
titletype
auto | custom | manual | none
auto
auto if the title contribution should be computed automatically, possibly using the group’s customization. custom if the title contribution should be computed automatically, but customized. manual if the manual title contribution should be used (the title property). none if no title contribution should be used.
xyresolution
int
200
The number of grid points in each direction to use when rendering the interference pattern. Cannot be greater than 1000.