Body Load

Add a to domains for modeling volumetric loads.

Select a — (the default), , or for 2D components, .

Then enter values or expressions for the components in the matrix based on the selection and the space dimension.

•

After selecting a , the list normally only contains . When combining with another physics interface that can provide this type of load, it is also possible to choose a predefined load from this list.

•

For COMSOL Multiphysics divides the total force by the volume of the domains where the load is active. For 2D components, and if is selected, the body load as force per unit volume is then the value of F divided by the thickness.


Load Type	variable	SI unit	Geometric Entity Level	Space Dimension (components)
Force per unit volume	FV	N/m3	domains	3D (x, y, z) 2D (x, y) 2D axisymmetric (r, z)
Force per unit area	FA	N/m2	domains	2D (x, y)
Total force	Ftot	N	domains	3D (x, y, z) 2D (x, y) 2D axisymmetric (r, z)

•

You can add the Phase subnode to specify the phase of this load in a frequency domain analysis.

•

You can specify this load to be a Harmonic Perturbation in a frequency domain analysis.

•

You can assign this load to a load group. See Load Cases in the Structural Mechanics Modeling chapter.

Location in User Interface

Context Menus

Ribbon

Physics tab with or selected:

Physics tab with selected: