The Fluid-Structure Interaction, Fixed Geometry Interface
The Fluid-Structure Interaction, Fixed Geometry () interface can be used to model phenomena where a fluid and a deformable solid structure affect each other. Both the fluid loading on the structure and the structural velocity transmission to the fluid can be taken into account. The interface models situations where the displacements of the solid are assumed to be small enough for the geometry of the fluid domain to be considered as fixed during the interaction.
When a predefined Fluid-Structure Interaction, Fixed Geometry interface is added from the Fluid Flow branch () of the Model Wizard or Add Physics windows, Laminar Flow and Solid Mechanics interfaces are added to the Model Builder.
In addition, the Multiphysics node is added, which automatically includes the multiphysics coupling feature Fluid-Structure Interaction, Fixed Geometry.
On the Constituent Physics Interfaces
The Laminar Flow interface solves the Navier-Stokes equations, for conservation of momentum, and the continuity equation, for conservation of mass, to compute the fluid velocity and pressure. The interface supports incompressible flows and compressible flows at low Mach numbers (typically less than 0.3). When the CFD Module is available, turbulent flow is supported through the inclusion of a number of turbulence models.
The Solid Mechanics interface is intended for general structural analysis of 3D, 2D, or axisymmetric bodies. In 2D, plane stress or plane strain assumptions can be used. The Solid Mechanics interface is based on solving Navier’s equations, and results such as displacements, stresses, and strains are computed.
Settings for Physics Interfaces and Coupling Features
When physics interfaces are added using the predefined couplings, all specific settings are included with the physics interfaces and the coupling features.
However, if physics interfaces are added one at a time, followed by the coupling features, these modified settings are not automatically included.
For example, if single Laminar Flow and Solid Mechanics interfaces are added, COMSOL adds an empty Multiphysics node. You can choose from the available coupling features, but the modified settings are not included.
Coupling features are available from the context menu (right-click the Multiphysics node) or from the Physics toolbar, Multiphysics menu.
Physics Interfaces and Coupling Features
Use the online help in COMSOL Multiphysics to locate and search all the documentation. All these links also work directly in COMSOL Multiphysics when using the Help system.
Coupling Features
The Fluid-Structure Interaction, Fixed Geometry coupling feature node is described in this section.
Physics Interface Features
Physics nodes are available from the Physics ribbon toolbar (Windows users), Physics context menu (Mac or Linux users), or right-click to access the context menu (all users).
In general, to add a node, go to the Physics toolbar, no matter what operating system you are using. Subnodes are available by clicking the parent node and selecting it from the Attributes menu.
•
The available physics features for The Single-Phase Flow, Laminar Flow Interface are listed in the section Domain, Boundary, Pair, and Point Nodes for Single-Phase Flow in the COMSOL Multiphysics Reference Manual.
•
The available physics features for The Solid Mechanics Interface are listed in the Domain, Boundary, Edge, Point, and Pair Nodes for Solid Mechanics section.