Conceptually, a geometry is a collection of bounded geometric entities. Those entities are volumes, surfaces, curves, or points. Geometric entities include domains, boundaries, edges (3D only), and points. For example, a 3D cube consists of one domain with six boundaries. The six boundaries have 12 edges and the edges connect at eight points (see Figure 6-1). This enables visualization of a cube by displaying one or more of these four types. For instance, you can create a wireframe plot by rendering only the cube’s edges.

Geometric entities of the maximum dimension are called domains, while those of the next highest dimension are called boundaries. The boundaries are sometimes referred to as faces in 3D and edges in 2D. The vertices are also called points.

Table 6-1 summarizes the terms used in COMSOL Multiphysics.

Geometry objects are adjacent if they connect directly to each other. Hence all boundaries, edges, and points on the cube are adjacent to the domain. An edge on the cube is adjacent to two boundaries and two points.

When you click a 3D geometry comprised of several objects, geometric entities of the same type might overlap and hide each other at the point where you click. Overlapping objects, such as interior boundaries, are highlighted and selected starting with the closest geometric entity and ending with the entity the farthest away. Use the scroll wheel (mouse wheel) to move the highlighting from the closest overlapping entity forward and back by rolling the wheel forward and backward (if you use COMSOL on a computer with a touchpad instead of a mouse, use its equivalent to the wheel; for example, moving two adjoining fingers up or down the touchpad). Then click to select the highlighted entity. If you can move the mouse wheel in small distinct increments, each such increment moves the selection to the next or previous entity that you can reach. Alternatively, use the up arrow and down arrow keys to highlight the next or previous entity, respectively.