Keyboard Shortcuts
The following table summarizes the available keyboard shortcuts on Windows and Linux and on Macintosh (see also the Application Builder documentation for specific keyboard shortcuts):
Shortcut (Windows, Linux)
Shortcut (Macintosh)
Action
F1
F1
Display help for the selected node or window.
Ctrl+F1
Command+F1
Open the COMSOL Documentation front page in an external Help window.
F2
F2
Rename the selected node, file, or folder.
F3
F3
Disable selected nodes.
F4
F4
Enable selected nodes.
F5
F5
Update solution with respect to new definitions without re-solving the model Also, on Windows, to continue in the Method Editor’s debugging tool in the Application Builder.
F6
F6
Build the preceding node in the Geometry branch or plot the previous plot for a time-dependent, eigenfrequency, or eigenvalue solution. Also, on Windows, to step in the Method Editor’s debugging tool in the Application Builder,
F7
F7
Build the selected node in the geometry and mesh branches, compute the selected study step, compute to the selected node in the solver sequence, or plot the next plot for a time-dependent, eigenfrequency, or eigenvalue solution. Also, on Windows, to step into in the Method Editor’s debugging tool in the Application Builder.
F8
F8
Build the geometry, build the mesh, compute entire solver sequence, update results data, or update the plot.
Del
Del
Delete selected nodes and selected geometry objects.
Left arrow (Windows); Shift + left arrow (Linux)
Left arrow
If you are at the top of a branch, pressing this collapses this branch in the Model Builder. Continue pressing the left arrow key to move upwards in the tree to collapse all branches.
If within a subbranch, pressing the left arrow key repositions you to the beginning of the branch.
Right arrow (Windows); Shift + right arrow (Linux)
Right arrow
Expand a branch in the Model Builder.
Up arrow
Up arrow
Move to the node above in the Model Builder.
Down arrow
Down arrow
Move to the node below in the Model Builder.
Alt+left arrow
Ctrl+left arrow
Move to the previously selected node in the Model Builder.
Alt+right arrow
Ctrl+right arrow
Move to the next selected node in the Model Builder.
Ctrl+A
Command+A
Select all domains, boundaries, edges, or points; select all cells in a table.
Ctrl+C
Command+C
Copy text in fields. Copy images in graphics and plot windows.
Ctrl+D
Command+D
Clear the selection of all domains, boundaries, edges, or points in the Model Builder. Clear all selections in form editor windows.
Ctrl+Shift+D
Command+Shift+D
Duplicate the selected node in the Model Builder.
Ctrl+F
Command+F
Find a search string in a model or application method.
Ctrl+K
Create, use, or rename a shortcut to an Model Builder node (for use in the Application Builder).
Ctrl+N
Command+N
Create a new model.
Ctrl+O
Command+O
Open a model file.
Ctrl+P
Command+P
Print the contents of the plot window.
Ctrl+S
Command+S
Save a model file.
Ctrl+V
Command+V
Paste copied text.
Ctrl+Y
Ctrl+Shift+Z
Redo the last undone operation.
Ctrl+Z
Command+Z
Undo the last operation.
Ctrl+up arrow
Command+up arrow
Move a definitions node, geometry node, physics interface or feature node (except default nodes), material node, mesh node, study step node, or results node up one step.
Ctrl+down arrow
Command+down arrow
Move a definitions node, geometry node, physics interface or feature node (except default nodes), material node, mesh node, study step node, or results node down one step.
Ctrl+Tab
Ctrl+Tab
Switch focus to the next window on the desktop.
Ctrl+Shift+Tab
Ctrl+Shift+Tab
Switch focus to the previous window on the desktop.
Ctrl+Alt+A
Switch to the Application Builder window from the Model Builder.
Ctrl+Alt+M
Switch to the Model Builder window from the Application Builder.
Ctrl+F8
Test an application.
Ctrl+Alt+left arrow
Command+Alt+left arrow
Switch focus to the Model Builder window.
Ctrl+Alt+right arrow
Command+Alt+right arrow
Switch focus to the Settings window.
Ctrl+Alt+up arrow
Command+Alt+up arrow
Switch focus to the previous section in the Settings window.
Ctrl+Alt+down arrow
Command+Alt+down arrow
Switch focus to the next section in the Settings window.
Shift+F10 or (Windows only) Menu key
Ctrl+F10
Open the context menu.
Ctrl+Pause
Command+. (Command + period)
Stop running a method when test running applications.
Ctrl+Space, Ctrl+/
Ctrl+Space, Ctrl+/
Open list of predefined quantities for insertion in Expression fields.