ECone

model.component(<ctag>).geom(<tag>).create(<ftag>,"ECone");

model.component(<ctag>).geom(<tag>).feature(<ftag>).set(property,<value>);

model.component(<ctag>).geom(<tag>).feature(<ftag>).getType(property);

Use model.component(<ctag>).geom(<tag>).create(<ftag>,"ECone") to create an eccentric oblique cone. The following properties are available:

Table 3-45: Valid Property/Value Pairs
Property	Value	Default	Description
angle	double	360	Ellipse sector angle.
axis	double[]	{0,0,1}	Direction of the normal to the bottom ellipse. Vector has length 3 if axistype is cartesian, and length 2 if axistype is spherical.
axistype	x \| y \| z \| cartesian \| spherical	z	Coordinate system used for axis. The value is synchronized with axis.
displ	double[2]	{0,0}	Displacement of top ellipse relative to bottom ellipse in the local coordinate system.
h	double	1	Height.
pos	double[3]	{0,0,0}	Center of the bottom ellipse.
r	double	1	Radius of bottom ellipse.
rat	double	0.5	Ratio between perimeter for top ellipse and bottom ellipse.
rot	double	0	Rotational angle about axis.
semiaxes	double[2]	{1,1}	Semi-axes of bottom ellipse.
type	solid \| surface	solid	Object type.
selresult	on \| off	off	Create selections of all resulting objects.
selresultshow	all \| obj \| dom \| bnd \| edg \| pnt \| off	dom	Show selections, if selresult is on, of resulting objects in physics, materials, and so on, or in part instances. obj is not available in a component’s geometry. dom, bnd, and edg are not available in all features.
contributeto	String	none	Tag of cumulative selection to contribute to.
workplanesrc	this \| Part Instance feature	this	Part Instance feature to take the work plane from.
workplane	xyplane \| Work plane feature	xyplane	Work Plane feature that defines the coordinate system. The default, xyplane, is the global Cartesian coordinate system.

model.component(<ctag>).geom(<tag>).create(<ftag>,"econe3") creates a solid eccentric cone.

model.component(<ctag>).geom(<tag>).create(<ftag>,"econe2") creates a surface eccentric cone.

Table 3-46: Valid Property/Value Pairs
Property	Value	Default	Description
a, b	double	1	Alias for semiaxes.
ax2	double[]	{0,0}	Alias for axis when axistype is spherical.
ax3	double[]	{0,0,1}	Alias for axis when axistype is cartesian.
x, y, z	double	0	Alias for pos.