2. D.M. Driver and H.L. Seegmiller, “Features of a Reattaching Turbulent Shear Layer in Diverging Channel Flow,” AIAA Journal, vol. 23, pp. 163–171, 1985.

3. H.K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics, Prentice Hall, 1995.

4. A. Durbin, “On the k-ε Stagnation Point Anomality,” Int. J. Heat and Fluid Flow, vol. 17, pp. 89–90, 1986.

5. A, Svenningsson, Turbulence Transport Modeling in Gas Turbine Related Applications,” doctoral dissertation, Department of Applied Mechanics, Chalmers University of Technology, 2006.

6. C.H. Park and S.O. Park, “On the Limiters of Two-equation Turbulence Models,” Int. J. Computational Fluid Dynamics, vol. 19, no. 1, pp. 79–86, 2005.

7. J. Larsson, Numerical Simulation of Turbulent Flows for Turbine Blade Heat Transfer, doctoral dissertation, Chalmers University of Technology, Sweden, 1998.

8. L. Ignat, D. Pelletier, and F. Ilinca, “A Universal Formulation of Two-equation Models for Adaptive Computation of Turbulent Flows,” Computer Methods in Applied Mechanics and Engineering, vol. 189, pp. 1119–1139, 2000.

9. F. Menter, J.C. Ferreira, T. Esch and B. Konno, "The SST Turbulence Model with Improved Wall Treatment for Heat Transfer Predictions in Gas Turbines,” Proceedings of the International Gas Turbine Congress, IGTC2003-TS-059, Nov. 2-7, 2003.

10. D. Kuzmin, O. Mierka, and S. Turek, “On the Implementation of the k-ε Turbulence Model in Incompressible Flow Solvers Based on a Finite Element Discretization,” Int.J. Computing Science and Mathematics, vol. 1, no. 2–4, pp. 193–206, 2007.

11. H. Grotjans and F.R. Menter, “Wall Functions for General Application CFD Codes,” ECCOMAS 98, Proceedings of the Fourth European Computational Fluid Dynamics Conference, John Wiley & Sons, pp. 1112–1117, 1998.

12. K. Abe, T. Kondoh, and Y. Nagano, “A New Turbulence Model for Predicting Fluid Flow and Heat Transfer in Separating and Reattaching Flows—I. Flow Field Calculations,” Int. J. Heat and Mass Transfer, vol. 37, no. 1, pp. 139–151, 1994.

13. H.C. Chen and V.C. Patel, "Near-Wall Turbulence Models for Complex Flows Including Separation,” AIAA Journal, Vol. 26, No. 6, pp. 641-648, 1988.

14. “The Spalart-Allmaras Turbulence Model,” http://turbmodels.larc.nasa.gov/spalart.html.

15. J. Dacles-Mariani, G.G. Zilliac and J.S. Chow, “Numerical/Experimental Study of a Wingtip Vortex in the Near Field”, AIAA Journal, vol. 33, no. 9, 1995.

16. “The Menter Shear Stress Transport Turbulence Model,” http://turbmodels.larc.nasa.gov/sst.html.

17. F.R. Menter, “Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications,” AIAA Journal, vol. 32, no. 8, 1994.

18. F.R. Menter, M. Kuntz, and R. Langtry, “Ten Years of Industrial Experience with the SST Turbulence Model,” Turbulence Heat and Mass Transfer, vol. 4, 2003.

19. M. Vázquez, M. Ravachol, F. Chalot, and M. Mallet, “The Robustness Issue on Multigrid Schemes Applied to the Navier-Stokes Equations for Laminar and Turbulent, Incompressible and Compressible Flows,” Int. J.for Numerical Methods in Fluids, vol. 45, pp. 555–579, 2004.

20. T. Cebeci, Analysis of Turbulent Flows, 2nd ed., Elsevier, Amsterdam, 2004.

21. J. Nikuradse, “Strömungsgesetze in rauhen Rohren”, Forschg. Arb. Ing.-Wes., no. 361, 1933.

22. D. Agonafer, L. Gan-Li and D.B. Spalding, “LVEL turbulence model for conjugate heat transfer at low Reynolds numbers”, EEP 6, ASME International Mechanical Congress and Exposition, Atlanta, 1996.

23. L. Prandtl, “Über die ausgebildete Turbulenz”, ZAMM 5, 1925.

24. P.R. Spalart and S.R. Allmaras, "A one-equation turbulence model for aerodynamic flows,” La Aerospatiale, no. 1, pp. 5-21, 1994.

25. P.A. Durbin, “Application of a near-wall turbulence model to boundary layers and heat transfer,” Int. J. Heat and Fluid Flow, vol. 14, no. 4, 1993.

26. K. Hanjalic, M. Popovac and M. Hadziabdic, “A robust near-wall elliptic-relaxation eddy-viscosity turbulence model for CFD,” Int. J. Heat and Fluid Flow, vol. 25, no. 6, 2004.