Add a Slip node to define slip for the velocity defined by

where σ is the stress tensor. The last equation expresses that no tangential stress exists at that boundary.

This results in a so-called no-penetration condition where no viscous boundary layer is created. This condition can be used at boundaries where it is not necessary to model the losses in the viscous boundary layer. Used together with the Adiabatic condition, no acoustic boundary layer is modeled.

Per default, the Slip condition uses a so-called discontinuous Galerkin or penalty formulation to prevent locking problems on curved surfaces.

To display this section, click the Show button () and select Advanced Physics Options.

Select Use weak constraints if you want to switch from the default discontinuous Galerkin (penalty like) formulation to a Lagrange multiplier formulation for the slip condition (this formulation is not suited for an iterative solver). The Lagrange multiplier formulation also prevents locking problems.